This device is used to coat surfaces with a thin film of a viscous fluid. To achieve this a spot of viscous fluid is placed in the center of the surface to be coated, then the item is spun at 500-5000rpm for a time that varies depending on the viscosity.

Created 3 years 4 months ago
note-present
lqZHimJ.jpg
specialty-coating-systems-spincoater-model-p6700 disassembly image-1
note-present
mG7vDi6.jpg
specialty-coating-systems-spincoater-model-p6700 disassembly image-2

Add your own disassembly guide to TakeItApart and help others learn! Get started

note-present
TL6r5mb.jpg
specialty-coating-systems-spincoater-model-p6700 disassembly image-3

Don't want to see ads? Just create an account and upload a guide.

note-present
xvZCyWh.jpg
specialty-coating-systems-spincoater-model-p6700 disassembly image-4
note-present
m9LQ8fs.jpg
specialty-coating-systems-spincoater-model-p6700 disassembly image-5
note-present
vUAU20g.jpg
specialty-coating-systems-spincoater-model-p6700 disassembly image-6
note-present
Q7L9os5.jpg
specialty-coating-systems-spincoater-model-p6700 disassembly image-7
note-present
FxtSk8D.jpg
specialty-coating-systems-spincoater-model-p6700 disassembly image-8
note-present
7hrfNkZ.jpg
specialty-coating-systems-spincoater-model-p6700 disassembly image-9
note-present
7GWl7bl.jpg
specialty-coating-systems-spincoater-model-p6700 disassembly image-10
note-present
t5syOfD.jpg
specialty-coating-systems-spincoater-model-p6700 disassembly image-11
note-present
vta8DsH.jpg
specialty-coating-systems-spincoater-model-p6700 disassembly image-12
note-present
6iyGiKJ.jpg
specialty-coating-systems-spincoater-model-p6700 disassembly image-13
note-present
HR3AABd.jpg
specialty-coating-systems-spincoater-model-p6700 disassembly image-14
note-present
DdSdpLb.jpg
specialty-coating-systems-spincoater-model-p6700 disassembly image-15

The motor housing

note-present
0Tgov5c.jpg
specialty-coating-systems-spincoater-model-p6700 disassembly image-16

The programmable logic controller. The terminal blocks were dry-rot, maybe as a result of bad plastic that year of manufacturing, solvent fumes should not have been an issue thanks to the air/nitrogen purge power switch (the unit won't turn on with less than some purge PSI >0).

note-present
d8m9RvE.jpg
specialty-coating-systems-spincoater-model-p6700 disassembly image-17

j or → for next item, k or ← for previous

Comment on this guide

Log in to post a reply.